RBD distribution terminal blocks are designed for use as terminal clamps when multiple smaller conductors must be connected to a conductor with bigger cross-section, for arrangement of distribution systems in cabinets, arrangement of main earthing busbar. Intended for installation on DIN rail or mounting panel both in power supply cabinets and flat distribution boards, working in the systems of voltages up to 1000 V and frequency 50 Hz, at ambient air temperature from -40 to +70 C. RBD distribution terminal blocks are made from high-quality brass with special protective coating. The body is made from non-combustible plastic. Installation methods: - on DIN rail 35 mm wide; - on the board panel using 2 screws. Made of tinned copper, the housing is made of flame-retardant plastic, having excellent electrical insulating properties. Number of poles: 1Connection type: EV000766Number of connections < 6 mm2: 0Number of connections 10 mm2: 0Number of connections 16 mm2: 7Number of connections 25 mm2: 0Number of connections > 25 mm2: 1Number of connections total: 8Mounting method: EV010333Height: 70.5Width: 29.0Depth: 47.0Nominal current: 125Frequency: EV008013Nominal voltage: 660Max medium-radar short current Icw: 4.2Nomin withstand pulse current Ipk: 30Degree of protection (IP): EV006405Section of conductors connections at the input: 1х35; 1х16Section of conductors connections at the outlet: 6х16Material housing: EV000139Material contact: EV000149Ambient temperature: -40... +70

Galerie